Rapid Heating; Setting The Timer; Care And Cleaning; Upper Glass Cover - Bosch HGV745223N Manual

The oven starts after a few seconds. The
in the display.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Cancelling the setting early
0
Press the Clock button twice. Press the - button until a zero
appears in the display. Switch off the function selector.
Changing the setting
0
Press the Clock button twice and make your settings as
described in section 4.
Note: You can change the setting while the symbol is flashing.
When the symbol lights up, the setting has been adopted.

Setting the timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer or cooking time has expired.
Setting procedure
0
S
Press the Clock button.
1.
The timer symbol flashes.
Use the + or - button to set the timer time.
2.
+ button / default value = 10 minutes
- button / default value = 5 minutes
The timer starts after a few seconds. The
the display. The elapsed time is shown.

Care and cleaning

With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
14
x
symbol appears
0
button
S
symbol appears in

Rapid heating

With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
1. Set the function selector to
Turn the temperature selector to set the desired temperature.
2.
p
The symbol lights up in the display. The oven begins to heat
up.
The rapid heating process is complete.
p
The symbol goes out in the display. Place your dish in the
oven and select the desired type of heating.
The time has elapsed
A signal sounds. Press the
goes out.
Changing the timer duration
Press the Clock button. Use the + or - button to change the
time.
Cancelling the setting
0
Press the Clock button. Press the - button repeatedly until a
zero appears in the display.
The timer and cooking time count down at the same time
The symbols light up. You can see the timer time counting
x
down in the display.
0
To query the remaining time:
Press the button.
The queried value appears in the display for a few seconds.

Upper glass cover

Before opening the top cover, remove any spills with a cloth.
Use glass cleaner if possible.
For cleaning, remove the top cover. To do this, hold the cover
securely on both sides with both hands and pull it upwards.
If the cover hinges become loose, note the letters marked on
them. The hinge with the letter R must be fitted on the right, and
the hinge with the letter L must be fitted on the left.
After cleaning, re-assemble the top cover following the same
procedure in reverse order.
Only close the top cover once the burners have cooled down.
I
.
0
Clock button. The timer display