Download Print this page

Safely Operate Equipment - Titan TS005V2 Operator's Manual

Tree shear

Advertisement

SAFELY MAINTAIN AND REPAIR EQUIPMENT
Do not wear loose clothing or any accessories that can catch in moving parts. If you have
long hair, cover, or secure it so that it does not become entangled in the equipment.
Work on a level surface in a well-lit area
Use properly grounded electrical outlets and tools
Use the correct tools for the job at hand. Make sure they are in good condition for the
task required.
Wear the protective equipment specified by the tool manufacturer.

SAFELY OPERATE EQUIPMENT

Do not operate equipment until you are completely trained by a qualified operator in how to
use the controls, know its capabilities, dimensions, and all safety requirements. See your
machine's manual for these instructions.
Keep all step plates, grab bars, pedals, and controls free of dirt, grease, and debris, and
oil.
Never all anyone to be around the equipment when it is operating.
Do not allow riders on the attachment or the prime mower.
Do not operate the equipment from anywhere other than the correct operator's
position.
Never leave equipment unattended with the engine running or with this attachment in a
raised position.
Do not alter or remove any safety feature from the prime mover or this attachment.
Know your work site safety rules as well as traffic rules and flow. When in doubt on any
safety issue, contact your supervisor or safety coordinator for an explanation.
QUALIFIED OPERATOR
Operators must acquire an appropriate qualification or license to operate skid steer and
attachments.
Operators must be mentally sound and not being affected by drugs or alcoholic drinks
while operating the equipment. Alcohol and drugs could reduce alertness and
coordination, causing catastrophic accidence with serious personal injury or death. An
operator taking prescription or over the counter drugs should seek medical advice as to
whether he or she can safely operate the equipment.
According to OSHA and applicable local regulations, operators must comply with
industrial work safety requirements with all necessary protective apparel and equipment
such as seat belts, helmets, safety glass, dust masks, heavy-duty gloves, etc.
ENVIROMENTAL FACTORS
Avoid working in bad weather, including but not limited to heavy rain, snowing, stormy
and windy weather.
Avoid working on the downhill side of a slope, hill, uneven and slippery ground.
Beware of above-ground utilities, including power and communication lines, gas, sewer
and water pipelines.
Check the work field thoroughly to avoid or remove obstacles or objects that may cause
an imbalance or damages of equipment that could lead to catastrophic accidence
4

Advertisement

loading

This manual is also suitable for:

198106