Specifications - Bose BUILT-INvisible TA-1 Service Manual

Theater amplifier
Hide thumbs Also See for BUILT-INvisible TA-1:
Table of Contents

Advertisement

Power Output (all channels loaded): Bass Channel:
Distortion:
Output Noise:
Signal to Noise Ratio:
DC Offset:
Satellite Balance:
Satellite Separation:
Standby Line Power:
Idle Line Power:
Analog Input Impedance:
S/PDIF Input Impedance:
Analog Input Sensitivity:
Analog Input CMRR:
Compressor:
Turn On Delay:
Turn Off Delay:
Volume Control Attenuation Range: 0 dB to -80 dB
Center Volume Control Range:
Surround Volume Control Range:
Audio Inputs:
Control Inputs:
Indicators:
Power Supply:
Dimensions:
Unit Weight:

SPECIFICATIONS

Satellite Channels:
Bass Channel:
Satellite Channels:
Bass Channel:
Satellite Channels:
96 dB
< 50 mVdc, all channels
+ 1.5 dB for volume settings 0 to -79 dB
> 40 dB at 1 kHz, > 30 dB at 10 kHz, stereo mode
< 5 W at rated line voltage (plugged in, music center off)
< 15 W at rated line voltage (plugged in, music center
on and muted)
5.0k Ohms + 10% at 1 kHz
75 Ohms + 10% at 100 kHz
0.5 Vrms input at 100 Hz/1 kHz for rated power in
bass/satellite channels
> 40 dB at 60 Hz, within + 12V common mode
> 20 dB compression from 200-10 kHz with distortion
throughout the compression range < 3% at 1 kHz and
< 4% at 50 Hz
1.5 Seconds maximum
< 200 mS
-6 dB to 0 dB in 1 dB steps, 0 dB to 9 dB in 1.5 dB steps
-6 dB to 0 dB in 1 dB steps, 0 dB to 9 dB in 1.5 dB steps
Audio and audio for video
IR, Serial (RS-232), Speaker Data (Music Center), and
TV Sense (logic level)
Power, Standby/Command, Setup/Analog Input, Fault/
Digital Input
110-120 Vac, 60 Hz, 400W, 3.63 Amps
15.75"H x 10.75"W x 3.38"D (40cm x 27.3cm x 8.6cm)
16 lbs (7.25 kg)
3
140 Watts at 100 Hz into 4 Ohms
35 Watts at 1 kHz into 8 Ohms
< 0.4% THD at 0.5W
< 0.1% THD at 0.5W
< 2 mVrms, unweighted
< 400 uVrms, A weighted

Advertisement

Table of Contents
loading

Table of Contents