Specifications - Bose 1800-V Manual

Size:
Weight:
Display:
Operating Temperature:
Power Output
Continuous Average Output Power, both
channels driven:
Bridged-mono Operation:
Voltage Output:
Dynamic Headroom:
Power Bandwidth:
Frequency Response:
Channel Separation:
Damping Factor:
Input Impedance:
*Sensitivity:
*Gain:
Input Overload:
*The amplifier sensitivity is set to 0.775V rms for rated output. To reduce the sensitivity by 6 dB to 1.5V rms,
remove JP100 (CH1) and JP200 (CH2), located on the main amplifier board.

SPECIFICATIONS

3.5"H (2U) x 19" W x 13.25" D
89mm x 483mm x 337mm
Net
Shipping 36 lbs. (16.3 kgs)
7 LED indicators per channel
1 green READY, 5 yellow SIGNAL, 1 red
CLIP/PROTECT
0° to 50° C, up to 85% RH
Performance Specifications
450 watts per channel into 8 ohms from 20 Hz to
20 kHz, with no more than 0.2% THD
600 watts per channel into 4 ohms from 20 Hz to
20 kHz, with no more than 0.2% THD
1400 watts into 8 ohms from 20 Hz to 20 kHz,
with no more than 0.2% THD
61.6V line voltage per channel into 8 ohms
1.0 dB nominal
5 Hz to 40 kHz (+0, -3 dB)
20 Hz to 20 kHz (±0.75 dB)
> 65 dB @ 1 kHz
>170
25 kilohms unbalanced, each leg to ground
50 kilohms balanced
High 0.775V rms for rated power into 4 ohms @ 1 kHz
57mV rms for 1W into 4 ohms @ 1 kHz
Low 1.5V rms for rated power into 4 ohms at 1 kHz
116mV rms for 1W into 4 ohms @ 1 kHz
High 36.2 dB (± 0.5 dB)
Low 30.2 dB (± 0.5 dB)
+18 dBu
4
30 lbs. (13.6 kgs)
> 55 dB @ 10 kHz