Advertisement
Step 1
You will need
5 x Dowels
5 x Small Cam
(H1)
Bolts (H3)
Phillips head
screwdriver
Step 2
You will need
4 x Wheels
8 x Small
(H5)
Screws (H6)
Phillips head
screwdriver
Step 3
You will need
5 x Small Cam
Phillips head
Nuts (H4)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 5 x Small Cam Nuts (H4) into the holes of Drawer Sides (P2, P3) and Central
Drawer Support (P6). Rotate the cam nuts so the arrows point towards the incoming
cam bolts. Aligen and sucure Drawer Sides (P2, P3) and Drawer Supports (P6, P7) into place,
and then tighten the cam nuts.
fantasticfurniture.com.au
H3
Insert 5 x Dowels (H1) into Drawer Front (P1).
Attach 5 x Small Cam Bolts (H3) to Drawer Front (P1).
H6
Attach 2 x Wheels (H5) to Drawer Support (P7) with 4 x Small
Screws (H6). Repeat Step 2 again with the other Drawer Support (P7).
(P2)
(P2)
H4
H4
H3
H1
H3
H1
(P1)
H6
H5
(P7) x 2
(P7)
(P6)
(P1)
H1
H3
H3
H6
H6
H5
(P7)
Grooves should
face inside.
(P3)
H4
(P3)
H4
H4
Page 5
Advertisement
