Avigilon H3-3MH-DC1 Web Interface User Manual page 9

1. Select a camera from the Port drop down list.
NOTE: The PTZ controls are only displayed when the camera is displayed by itself.
2. To move the camera field of view, click one of the directional buttons on the far left.
3. To control the camera's Zoom, Iris or Focus, click the + or - buttons.
4. For Presets, you can perform any of the following:
To add a preset, move the camera's field of view into position then give the preset a name and
l
click Set.
To use a preset, select a name or number from the drop down list and click Go To.
l
5. For Patterns, you can perform any of the following:
To record a pattern, select a number from the drop down list then click Record. Use the directional
l
buttons to move the camera and create the pattern. When you are done, click Stop.
To run a pattern, select a number from the drop down list and click Run.
l
6. To activate an auxiliary command, select an Aux# from the drop down list and click Start. When you are
finished, click Stop.
Using the Encoder PTZ Controls 5