Table of Contents
Advertisement
Quick Links
Check entire box and all packing materials for parts. Before beginning assembly, read the
instructions and identify parts using the fi gures and parts listed in this document.
It is critical that all parts be carefully inspected prior to installation. If any damage occurred in
transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit.
Proper installation cannot be overstressed, as an improper installation voids Aqua Creek's
warranty and may affect the safety of the user.
Copyright © 2019 Aqua Creek Products All Rights Reserved
US PATENT NUMBER: [D507,769 S] [7,249,386 B2]
300 LB. [136 kg] MAXIMUM WEIGHT CAPACITY
Lift safety can only be ensured if the lift is installed and
operated according to these instructions.
• NEVER permit children to play on or around the lift
• Do not allow children to use the lift without adult
supervision
• NEVER apply direct water pressure to the electronics
• NEVER use the lift with a dry pool
ADA COMPLIANT
READ CAREFULLY
Ambassador
Pool Lift
PART #: F-PPXRD-NA-03
MANDATORY
LEAVE THIS MANUAL WITH LIFT OWNER
Read and follow all instructions.
1
Revised 6/17/19
Advertisement
Table of Contents
Related Manuals for Aqua Creek Ambassador Pool Lift
Summary of Contents for Aqua Creek Ambassador Pool Lift
- Page 1 It is critical that all parts be carefully inspected prior to installation. If any damage occurred in transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit. Proper installation cannot be overstressed, as an improper installation voids Aqua Creek’s warranty and may affect the safety of the user.
-
Page 2: Table Of Contents
2. 24V VITO BATTERY 3. VITO BATTERY CHARGER 4. VITO HANDSET 5. SAFETY BELT 6. VITO BATTERY TEST CABLE 7. ANCHOR JIG PLATE & HARDWARE (IF ORDERED WITH ANCHOR) Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19... - Page 3 2 " 12" CHAIR C L 2 " 16" (ADA REQ'D MIN.) *NOTE: 22 1/2" IS THE POOL WALL MINIMUM SETBACK 38" IS THE MAXIMUM LIFT SETBACK. FIGURE 1 Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19...
-
Page 4: Anchor Installation: Core-Drill Retro-Fit
NOTE: We recommend using masking tape around the holes on the bottom of the anchor jig plate to help prevent the anchor plate from being accidentally epoxied to the pool deck. Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19... - Page 5 OBSTRUCTION) LIFT OUTLINE USE JIG-PLATE (LARGER HOLES) USE JIG-PLATE TO MARK LOCATIONS ASSEMBLY FOR TEST-FITTING AND TO HOLD ANCHORS IN PLACE AS EPOXY CURES FIGURE 3 Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19...
-
Page 6: Anchor Installation: Saw-Cut Retro-Fit
10. Once the concrete has cured, the lift is ready FOR SLOPED DECKS OR OTHER FEATURES, CONTACT AQUA CREEK BEFORE INSTALLATION. to be mounted to the anchoring system. FIGURE 5 Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19... - Page 7 680.26) SEE FIGURE 5, PAGE 6 6. Pour your concrete and fi nish the pool deck surface. 7. Once the concrete has cured the lift is ready to be mounted to the anchoring system. Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19...
- Page 8 1. Attach seat belt to the seat. SEE FIGURE 7 FOR EASY ACCESS 2. Install the Ambassador pool lift onto the three (3) anchors using the supplied 1/2 inch x 1 1/2 inches stainless steel hex-head bolts and 1/2 inch stainless steel washers.
- Page 9 Installation Instructions The Aqua Creek legrest assembly is designed to fi t under the chair and is installed inside the 2” square tubing that supports the chair from underneath. To install the legrest; 1. Insert the legrest assembly into the 2 x 2 square tubing that supports the chair until the plastic insert of the legrest assembly sits fl ush against the end of the 2 x 2 tube.
-
Page 10: Basic Troubleshooting
Note: If you feel your lift is malfunctioning due to a faulty battery or connections, contact Aqua Creek Products for a testing kit. Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19... -
Page 11: Battery Test Cable Instructions
ONLY FOR CHECKING THE BATTERY VOLTAGE! The Aqua Creek 24V battery has a cable and connector for connecting to the control box or to the battery charger. The battery connector is not suitable to check the battery voltage, as it is very hard to probe the connector without shorting-out the battery, which will cause damage. -
Page 12: Pinch Point Locations
Pinch Point Locations CAUTION! PINCH POINT AREA! Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19... -
Page 13: Proper Care Of Pool & Spa Lifts
To remove stubborn stains from finish, spray affected area with mild dish soap, rub briskly with a 3M Scotch Brite™ pad. Use white epoxy paint to touch up the finish. Apply wax to protect when dry. Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19... -
Page 14: Ambassador Parts List
5/16”-18 F-45ACB-C RESISTANT BOLT, 18-8 SS, 3/8 X 1 BOLT, 316 SS, 1/2” X 1 3/4” BS 3/8 X 1-3/4 18-8 3/4 SHOULDER, 5/16- PPB-CCB-10 FHSCS, CUSTOM 18 THREAD Copyright © 2019 Aqua Creek Products All Rights Reserved Revised 6/17/19...
Need help?
Do you have a question about the Ambassador Pool Lift and is the answer not in the manual?
Questions and answers