Controls; Dials; Switches - Camtraptions PIR Manual

Controls

The PIR is configured via three dials and a bank of six switches on the front.
There is also an On-off switch on the bottom of the device.

Dials

The dials control the following functions:
Sensitivity – See Page 6
Time Variable – See Page 6
Luminosity Threshold or Secondary Time Variable – See Page 7
Note that the behaviour of the Time and Luminosity Dial varies based on the
program. The behaviour of the Sensitivity Dial is the same for all programs.

Switches

The switches control the following functions:
1-5: Program select – See Page 8
6: Wireless mode on-off – See Page 17
Camtraptions PIR Motion Sensor Manual Page 4