Mounting The Sensor - Camtraptions PIR Manual

Mounting the Sensor
There is a standard tripod socket on the bottom of the sensor that allows it to
be mounted on a tripod or similar mounting accessory.
The device also has attachment points for a strap on either side so that it can
be strapped to a post or tree trunk.
The sensor is sealed so that the electronics and batteries are protected from
precipitation. However, it is possible for water to trickle inside via the camera
connecting cable socket if the sensor is not mounted with this socket facing
downwards. Therefore, it is important to mount the sensor the correct way up.
Camtraptions PIR Motion Sensor Manual Page 11