Program Selection - Camtraptions PIR Manual

Program Selection
The PIR features 32 different operating programs. Programs are set via
switches 1 to 5 on the front of the device. These switches are located under
the watertight bung, behind the flap, to the left of the sensor dome.
There are 32 unique switch combinations that can be used to select
programs. Use the diagram below as a reference for the switch positions. For
example, if all of the switches were to be in the OFF position, the PIR would
run Program 1. If only switches 2 and 3 were in the ON position, the PIR
would run Program 13.
Camtraptions PIR Motion Sensor Manual Page 15