Modifying the parameters displayed in Pr1:
3.11 Modifying the value of Password Pr2
Proceed as follows to edit the value of the password:
•
press SET and simultaneously for 5 seconds
•
press
•
press SET
•
press
•
press SET to confirm the value
•
parameter Et01 will be displayed once again (in this case the parameters of level Pr2 are
displayed)
•
press
•
press SET
•
press
•
press SET to confirm the value
•
press SET and
1592026270 IEV12-14D GB r.1.0 21.02.2019
to view the password Pr2 parameter (last parameter on the list)
to enter the value of the current password
to view the password Pr2 parameter (last parameter on the list)
to enter the new value of the password
simultaneously to exit from the programming area of the parameters
IEV
17/56