Emerson Dixell IEV12D Installing And Operating Instructions page 50

Recommendations:
- follow the diagram of the device used, for the numbering.
- the configuration is determined by the application.
- if used as a digital input (potential free - not live), use the same connection configuration as of the
sensors.
14.2.2 Pressure transducers and current probes (4 - 20 mA)
2-wire sensors that require +12Vdc power supply.
Each sensor must be connected through one of the inputs (from Pb1 to Pb10) and the power supply
(+12V) as shown in the diagram below.
Recommendations:
- follow the diagram of the device used, for the numbering.
- the configuration is determined by the application.
1592026270 IEV12-14D GB r.1.0 21.02.2019 IEV 51/56