INSTALLATION OF THE APPLIANCE (CONTINUED)
Freestanding installation (continued)
Make sure both clip modules are in the same orientation
after installation.
Clip the kick panel onto the front feet of the appliance.
Make sure the kick panel snaps onto the larger section
of the front feet.
14
INSTALLATION OF THE APPLIANCE
Slot-in installation
The slot-in type installation use the appliance as
supplied. The appliance can be mounted on a plinth.
This enables a continuous cupboard kickboard to be
installed, giving a more integrated appearance. There is
no clearance requirement between oven and adjacent
side cabinets.
600mm minimum
vertical clearance
from combustible
surfaces
755mm
900mm
This surface to be level with
the top edge of the kick board
15
INSTALLATION OF THE APPLIANCE