Westinghouse WFE904SD User Manual page 19

USING YOUR OVEN (CONTINUED)
Setting the cook time
1. Use the knobs to select the desired oven function
and cooking temperature.
2. Touch the button as often as necessary, until
the 'cook time' symbol appears.
3. Set the desired cooking time commencing with
minutes by using or , whilst the symbol is
flashing, then touch the button again and set
the hours by using or . After 5 seconds from
the last time adjustment the symbol will stop
flashing. The appliance is now programmed and
the display will countdown to zero.
4. When the set time has elapsed, a signal will sound
and the appliance will turn off. To stop the signal,
touch any button on the clock and then turn the
oven function selector to OFF.
NOTE: Cooking time cannot be set for the Rapid
Heat function.
The feature can be cancelled at any time by returning
the function selector to OFF.
Setting the oven function
1. Turn the oven selector clockwise to select
the desired oven function. The default temperature
for that function will be shown on the display.
2. After 5 seconds from the last change, the oven will
begin heating and the "Elapsed time" commences on
the display.
Changing the oven temperature
1. Toggle the selector left ( ) or right ( ) as
required to set the desired cooking temperature. The
temperature setting changes in increments of 5°C.
2. The set temperature is displayed for 5 seconds from
the last change.
NOTE: The temperature can be adjusted at any time.
Oven temperature cannot be changed for the Defrost or
Pyro function.
Setting the end time
1. Use the knobs to select the desired oven function
and cooking temperature.
2. Touch the button as often as necessary, until
the 'end time' symbol appears.
3. Set the desired end time commencing with hours
using or whilst the symbol is flashing, then
touch the button again and set the minutes by
using or . After 5 seconds from the last time
adjustment the symbol will stop flashing and the
appliance is now programmed.
4. When the set time has elapsed, a signal will sound
and the appliance will turn off. To stop the signal,
touch any button on the clock and then turn the
oven function selector to OFF.
NOTE: Stop time cannot be set for the Rapid Heat function.
36
USING YOUR OVEN
Setting the delayed start cooking time
The 'cook time' and 'end time' functions can be
combined to switch the oven on and off at a specific
time during the day.
1. Use the knobs to select the desired oven function
and cooking temperature.
2. Touch the button as often as necessary, until the
'cook time' symbol appears.
3. Set the desired cooking time by using or , whilst
the symbol is flashing.
4. Touch the button as often as necessary, until the
'end time' symbol appears flashing.
5. Set the desired switch-off time using or whilst
the 'end time' symbol is flashing.
6. 5 seconds after the last change the 'cook time' and
'end time' arrows are lit to confirm that the oven has
been programmed.
7. When the delayed start cooking time has elapsed,
a signal will sound and the appliance will turn off.
To stop the signal, press any button on the clock
and then turn the oven function selector to OFF.
NOTE: Delayed start cooking time cannot be set for the
Rapid Heat function. The feature can be cancelled at any
time by returning the function selector to OFF.
Additional Functionality
Setting the countdown timer
Use this for timing any activity, for example baking
bread.
1. Touch the button, the display will flash.
2. Set the countdown time you want by using and
. Commence with setting the number of seconds
first. The minutes and hours can then be set by
subsequently pressing the button again and
adjusting using or . 5 seconds after the last
change the timer will stop flashing, confirming the
timer has been set.
3. To cancel the timer touch the button, the display
will flash. Then touch and hold and buttons
until the timer is cleared.
4. To stop the beeper, touch any button.
NOTE: The clock display cannot be selected when the
timer is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic
clean) an elapsed timer commences on the display.
To reset this timer touch and hold both the and
buttons until the timer is reset.
Displaying the oven temperature
During operation of the oven the current oven
temperature during pre-heating of the oven can be
displayed by touching the button. During normal
operation the set temperature can be reviewed by
touching the button.
NOTE: this temperature will only be displayed for
approximately 5 seconds.
Light operation
During operation of the oven the light can be switched
off by touching and holding the button until the
light turns off. Also the light can be turned on from the
standby state by touching and holding the button
until the light comes on.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1. Switch off the appliance using the function
selector switch.
2. Touch and hold the and buttons at the same
time until the word 'SAFE' is displayed and a double
beep is sounded. The word SAFE will be replaced by
a padlock symbol on the display after 5 seconds.
Releasing the child-proof lock
Touch and hold the and buttons at the same
time until a double beep is sounded. This will commence
to unlock the door and after 5 seconds the oven is ready
for use.
Activating the function lock
The active function can be locked so it is not changed
unintentionally.
1. The active function can be locked, to activate touch
and together until 'Loc' is displayed.
2. If the oven is switched-off while in 'Loc' it will
switch into Child lock mode and the display will
show 'SAFE'.
3. Oven can be released the same way as 'Releasing
the child proof lock'
Safety Cut-out feature
The oven automatically switches itself off if the
temperature is not adjusted or the appliance is left
operating after a period of time. The oven switches
itself off after:
• 12.5 hours when the temperature is set less
than 120°C.
• 8.5 hours when the temperature is set to 120°C
or above, and below 200°C.
• 5.5 hours when the temperature is set to 200°C
or above, and below 250°C.
• 3.0 hours when the temperature is set at 250°C.
DEMO Mode
The oven can be set to operate in a demo mode (e.g. in a
retail store). In this mode the display works and functions
can be set but the oven does not actually heat. When
in this mode the text 'DEMO' will be lit. The following
instructions show how to enter and exit 'Demo' mode.
1. Ensure the oven is in the off state. Toggle and hold
the selector to until a beep sounds. The 'DEMO'
text will begin to flash.
2. Toggle the temperature selector to set the first digit
of display to 2. Touch clock to set.
3. Repeat step 2 until display shows 24:68. 3 beeps
sound and DEMO will be shown.
To disable DEMO mode repeat steps 1 - 3.
USING YOUR OVEN
37