fantastic furniture Java Quick Start Manual page 10

Step 10
You will need
6 x Cam Flat Head
Nuts (H2) Screwdriver
Two People
Required
With assistance, position top panel (P1) onto panels (P3, P4, P5) as shown.
Make sure the groove in top panel (P1) is on the same side as the side panels (P3).
Insert 6 x cam nuts (H2) into panels (P3 x 2, P4). Rotate the cam nuts so the arrows
point towards the incoming cam bolts and turn clockwise to lock with a flat head screwdriver.
Step 11
You will need
6 x Back Panel
6 x Screws
Connectors (H7)
16mm (H6)
Phillips Head
Screwdriver
H7
If necessary, gently adjust the top panel (P1) sideways in either direction
until XX and YY are equal.
Holding it in place, fix 6 x back panel connectors (H7) to assembled unit
with 6 x screws (H6) as shown, using a phillips head screwdriver.
fantasticfurniture.com.au
H2
H2
(P3)
Two People
Required
(P1)
(P5)
H6
(P1)
(P5)
(P4)
(P1)
(P5)
H7
H2
H2
H2
H2
(P3)
Page 10