Swa Parameters; Baud Rate: 300; Data, Stop Bits, And Parity; Table 4-1. Swa Command - Magtek MICR Plus Technical Reference Manual

BITS
7 6 5 4
0 0
1 0
0 0
1 0
0 1
1 1
0 1
1 1
0
1
0
1

SWA PARAMETERS

The SWA functions are listed in Table 4-1 and described below.
Baud Rate
The baud rate is one of seven speeds at which the MICR Plus communicates with the host. The
lowest speed is 300 baud, and the highest is 19200.

Data, Stop Bits, and Parity

Data refers to the number of data bits used to transmit every character; the options available are
7 or 8. Stop Bits refer to the number of bits used to indicate the end of transmission for every
character; the options available are 1 or 2. Parity refers to a means of detecting bit-level
transmission errors for every character; the options available are None, Even or Odd.

Table 4-1. SWA Command

3 2 1 0
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
0
0
1
1
0
0
1
1
FUNCTION
Reserved

Baud Rate: 300

Baud Rate: 600
Baud Rate: 1200
Baud Rate 2400
Baud Rate: 4800
Baud Rate: 9600
Baud Rate: 19200
Data, Stop Bits, Parity: 8, 1, None
Data, Stop Bits, Parity: 8, 2, None
Data, Stop Bits, Parity: 8, 1, Even
Data, Stop Bits, Parity: 8, 1, Odd
Data, Stop Bits, Parity: 7, 1, Even
Data, Stop Bits, Parity: 7, 2, Even
Data, Stop Bits, Parity: 7, 1, Odd
Data, Stop Bits, Parity: 7, 2, Odd
CTS/DSR: Use
CTS/DSR: Ignore
Intercharacter Delay: No
Intercharacter Delay: Yes
Section 4. Commands
11