Open Network Assistant; Send And Receive Data Test - Ebyte NB144 User Manual

Chengdu Ebyte Electronic Technology Co., Ltd. NB144 User Manual

2.3.5 Open network assistant

Select the "TCP client " mode, configure the remote IP as "1 92.168.3.7 ", and configure the remote port as "8 001 ",
as shown in the figure below:

2.3.6 Send and receive data test

Click the [Send] button on the " Network Debug Assistant " and " Serial Port Debug Assistant " respectively to
realize the transparent transmission of network and serial port data, as shown in the figure below.
Copyright ©2012，Chengdu Ebyte Electronic Technology Co., Ltd. 9