Record And Watch Video; Rules And Alerts; Trigger An Action; Record Video When The Camera Detects Motion - Axis P1375 User Manual

AXIS P1375 Network Camera
Setup

Record and watch video

To record video you must first set up network storage, see Set up network storage on page 11 , or have an SD card installed.
1. Go to the camera's live view.
2. Click on Record once to start recording and one more time to stop recording.
To watch your recording:
1. Click on Storage > Go to recordings.
2. Select your recording in the list and it will play automatically.

Rules and alerts

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text when it records.

Trigger an action

1. Go to Settings > System > Events to set up an action rule. The action rule defines when the camera will perform certain
actions. Action rules can be setup as scheduled, recurring, or for example, triggered by motion detection.
2. Select what Trigger must be met to trigger the action. If you specify more than one trigger for the action rule, all
of them must be met to trigger the action.
3. Select which Action the camera should perform when the conditions are met.
Note
If you make changes to an active action rule, the action rule needs to be restarted for the changes to take effect.

Record video when the camera detects motion

This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to
stop one minute after.
Make sure the AXIS Video Motion Detection application is running:
1. Go to Settings > Apps > AXIS Video Motion Detection.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Create an action rule:
1. Go to Settings > System > Events and add an action rule.
2. Type a name for the action rule.
3. From the list of triggers, select Applications and then select AXIS Video Motion Detection (VMD).
4. From the list of actions, select Record video.
5. Select an existing stream profile or create a new one.
6. Enable and set the pre-trigger time to 5 seconds.
7. Enable While the rule is active.
12