Summary of Contents for Homestyles Flexsteel 20 05503 0102
Page 1
4 pcs. (+1 extra) 24 pcs. (+1 extra) 2 pcs. Carton 20 05503 0101 is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 2
Assembly Instructions 2/5 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly.
Page 3
Assembly Instructions 3/5 Figure 4 Figure 3 Head Cap Bolt Spring Washer Flat Washer STEP 3 Cam Lock Turn unit to its’ upright position. Attach Side Panels (C) and (D) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. (See Figure 3) Attach Middle Panels (E) and (F) to unit with Cam Locks.
Page 4
Assembly Instructions 4/5 Cam Lock Flat Washer Spring Washer Head Cap Bolt STEP 5 Attach Top (A) to unit with Head Cap Bolts, Spring Washers, Flat Washers and Cam Locks, tightening bolts only halfway. Tighten all bolts used in Steps 3 and 5. Place Shelves (I) and (J) into position.
Assembly Instructions 5/5 IMPORTANT To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly. STEP 7 Pre-drilled hole Anchor in wall Bracket Wall Screw on wall at top of unit Place unit at desired location.
Page 6
Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: www.homestyles-furniture.com/customer-service/replacement-parts Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Need help?
Do you have a question about the Flexsteel 20 05503 0102 and is the answer not in the manual?
Questions and answers