Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
C.
Middle Panel
1 pc.
Hardware List
Hex Wrench
Cam Lock
1 pc.
25 pcs. (+4 extra)
Small
M x
4 25
Hex Wrench
Wood Screw (long)
1 pc.
32 pcs. (+1 extra)
Cartons 20 05506 0941 and 0942 are also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 05506 0943
Kitchen Island
G.
Base
1 pc.
H.
Plinth
1 pc.
M x
6 30
Cam Lock Screw
Head Cap Bolt
25 pcs. (+2 extra)
2 pcs. (+1 extra)
Adjustable Pin
Hinge
8 pcs. (+1 extra)
2 pcs.
M x
6 45
M x
4 25
Head Cap Bolt (long)
Wood Screw
4 pcs. (+1 extra)
4 pcs. (+1 extra)
M x1
4
5
Wood Screw
M4x25
for Hinge
Machine Screw
12 pcs. (+1 extra)
2 pcs.
888-680-7460, 877-831-0319
K.
Drawer
1 pc.
L.
Drawer
1 pc.
M.
Drawer
2 pcs.
Refer to later page(s) of these
instructions for drawers assembly.
M x
4 15
Wood Screw (short)
24 pcs. (+1 extra)
M4x35
Machine Screw (long)
8 pcs.
Handle
5 pcs.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Homestyles 20 05506 0943
Summary of Contents for Homestyles 20 05506 0943
- Page 1 8 pcs. (+1 extra) 2 pcs. 12 pcs. (+1 extra) 2 pcs. 8 pcs. 5 pcs. Cartons 20 05506 0941 and 0942 are also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/10 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the screws until each part is properly assembled. Ÿ The unit must be level to work properly.
- Page 3 Assembly Instructions 3/10 Cam Lock Figure 3 STEP 3 Attach Back Panel (E) to Back Panel (F) with Cam Locks. (See Figure 3) Cam Lock STEP 4 Attach Base (G) to unit with Cam Locks.
- Page 4 Assembly Instructions 4/10 Head Cap Bolt STEP 5 Place Top (A) upside down on a soft cloth. Attach Middle Panel (C) to Top (A) with Cam Locks. Attach unit from Step 4 to unit with Head Cap Bolts. (See Figure 4) Cam Lock Figure 4 Cam Lock...
- Page 5 Assembly Instructions 5/10 Cam Lock Head Cap Bolt (long) STEP 7 Attach Side Panel (B) to unit with Head Cap Bolts (long). Attach Side Panel (B) to unit with Cam Locks. STEP 8 Turn unit to its front side onto a soft cloth.
- Page 6 Assembly Instructions 6/10 Wood Screw for Hinge Figure 5 STEP 9 Attach Hinges to Door (I) with Wood Screws for Hinge into pre-drilled holes, then tighten. (See Figure 5) Adjustable Pin Wood Screw for Hinge STEP 10 Figure 6 Turn unit from Step 8 to its upright position. Insert Adjustable Pins into side panel and middle panel at desired level.
- Page 7 Assembly Instructions 7/10 Drawer (K) Wood Screw (long) Bottom STEP 11 Attach Drawer Front (K1) and Drawer Back (K2) to Drawer Side (K3) with Wood Screws (long). Attach Drawer Side (K4) to unit with Wood Screws (long). Roller at back STEP 12 Wood Screw (short) Slide Drawer Bottom (K5) into groove.
- Page 8 Assembly Instructions 8/10 Drawer (L) Wood Screw (long) Bottom STEP 14 Attach Drawer Front (L1) and Drawer Back (K2) to Drawer Side (K3) with Wood Screws (long). Attach Drawer Side (K4) to unit with Wood Screws (long). Roller at back STEP 15 Wood Screw (short) Slide Drawer Bottom (K5) into groove.
- Page 9 Assembly Instructions 9/10 Drawer (M) Wood Screw (long) Bottom STEP 17 Attach Drawer Front (M1) and Drawer Back (M2) to Drawer Side (M3) with Wood Screws (long). Attach Drawer Side (M4) to unit with Wood Screws (long). Roller at back STEP 18 Wood Screw (short) Slide Drawer Bottom (M5) into groove.
- Page 10 Assembly Instructions 10/10 Machine Screw Handle STEP 20 Attach Handle to Door (I) with Machine Screws. Slide Drawers (K), (L) and (M) into position. Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 8) Figure 8 STEP 21 If needed, adjust door up or down by removing the front Wood Screws for Hinge and loosening slightly the back Wood Screws for Hinge from side panel,...
- Page 11 Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: www.homestyles-furniture.com/customer-service/replacement-parts Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Need help?
Do you have a question about the 20 05506 0943 and is the answer not in the manual?
Questions and answers