Detector Setup - Emerson Rosemount 975 Reference Manual

Reference Manual
00809-1500-4975
Procedure
To adjust number of records shown, change the number in the Get field and then press the
Get button.
A. Displays records according to selection in the records up to current position field
B. Scrolls up by page
C. Scrolls down by page
D. Scrolls up by line
E. Re-read by line
F. Select which records will be displayed when clicking Get button
G. Opens selected number of most recent records in .txt format
3.9

Detector setup

The detector is setup using the Detector Setup screen, in which configurable options, BIT
settings, Accessory Relay Options, Detection Options, Lock Option, and 4-20 Settings can
be changed.
Note
4-20mA settings – for fault mode, the default indication is 1mA, but may be changed to
0mA. To preserve the HART
using a HART connection.
Rosemount 975
®
communication, this is not recommended for customers
Operation
June 2021
21