Operation
June 2021
3.3
Assign address to device
Procedure
1. In the Address pane, select the New Address for the Detector radio button.
2. Use the Address dropdown to select the required address.
3. Click the Set New button.
3.4
Switch device address
Procedure
1. In the Address pane, select the Switch to Detector radio button.
2. Use the Address dropdown to select the required address.
3. Click the Switch button.
16
Note
Alternatively, the up and down arrows can be used to switch the address without
clicking the Switch button.
Reference Manual
00809-1500-4975
Emerson.com