Table of Contents
Advertisement
Troubleshooting table
Problem
The top of the pizza is
burnt
The bottom of the pizza
is burnt
Dirty stone floor
The heating indicator
light comes on and goes
off.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Cause
Temperature set too high
Temperature set too high
Humidity on the underside of
the floor.
This is an automatic thermostat
light.
Article 62880
Solution
If you feel that the top is cooking faster
than the bottom when you check the
pizza, turn the oven setting back to 4
and let the pizza continue cooking with-
out the thermostat light on. Alternatively,
leave the lid open for a few minutes so
that you can watch the pizza as it bakes.
Make sure the oven is preheated to level
5. When the oven light goes out, let the
stone rest for a few minutes before put-
ting the pizza in. If you are baking sever-
al pizzas in succession, it is best to leave
the lid open for a few minutes between
baking and then return the setting to 4.
Don't worry if the stone leaves marks.
The bigger the marks, the better the
taste of the pizza. Simply scrape off any
excess material with the pads.
The light stays on until the oven has
reached the desired temperature setting.
Seite 6
02
2021-1
Advertisement
Table of Contents
