Wheel Installation - Yamaha VIKING YXM700PE Owner's Manual

EVU00940

Wheel installation

1. Install the wheel and the nuts.
TIP
Tapered nuts are used for both the front and
rear wheels. Install the nuts with their tapered
side towards the wheel.
8
1. Tapered nut
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts in a crisscross
pattern to the specified torque.
WARNING
Do not reverse the rims on your Yamaha
Viking to widen the track width. Installing
wheels improperly increases the risk of
wheel failure and accidents.
Tightening torques:
Front wheel nut:
75 Nm (7.5 m·kgf, 54 ft·lbf)
1
Rear wheel nut:
75 Nm (7.5 m·kgf, 54 ft·lbf)
8-41