Stokke XPLORY User Manual page 5

Winter kit:
• Winter hood
• Back cover
• Storm cover
• Finger muff
• Rim Sheep skin
From basic to winter kit:
Remove the hood (1)
- Unzip to release the hood.
- Unbutton on each side of the hood.
- Pull up the fabric on the side at the
front to reveal the hood fastener.
- Press the notch on the hood fastener
and pull up the hood. Repeat at the
other side.
Remove the back cover (2)
- Loosen the fabric from the push
buttons in the sides and front.
- Pull the fabric of the Velcro.
Assembly the winter kit:
Seat (3)
- Put on the back cover:
* Line up the center mark on the
fabric to the corresponding center
mark on the Roll over protection.
* Attach the cover edge-to-edge on
the Velcro.
* Attach the cover with the push
buttons, 2 on each side, and with
the two on each side of the front.
- Insert the main rib into both sides of
the hood fastener.
- A click will be heard when the rib is
placed correctly.
- Zip the hood onto the seat fabric.
- Fasten the hood with the push
buttons on each side.
Carry Cot (4)
- Insert the main rib into both sides of
the hood fastener.
- A click will be heard when the rib is
placed correctly.
- Attach the hood to the Carry Cot
lining with the zipper.
- Fasten the hood with the push
buttons on each side.
All manuals and user guides at all-guides.com STOKKE XPLORY
®
Sun visor or sheep skin rim (5)
- Attach either the sun visor or the sheep
Storm cover:
Seat (6)
- Pull the storm cover over the handle and
- Pull the storm cover over the main rib of
- Fasten the storm cover with the push
- Pull the zippers, one on each side of the
Carry Cot (7)
- Pull the storm cover over the handle and
- Pull the storm cover over the main rib of
- Fasten the storm cover with the push
- Pull the zippers, one on each side of the
Parent finger muff (8)
- Pull the parent finger muff onto the
- Fasten with push buttons.
WARNING:
Sheep skin for Stokke
with the Stokke
not be used with Stokke
under any circumstances.
®
skin rim onto the hood using the zipper.
the foot rest.
the hood.
* Secure it around the main rib.
buttons on each side.
central bar.
the carry cot.
the hood.
* Secure it around the main rib.
buttons on each side.
central bar.
handle.
Xplory
®
Xplory Seat only, and shall
® ®
®
1
EN
is to be used
®
Xplory Carry Cot
®