Table of Contents
Advertisement
2-2-8 USB Configuration
Parameter
USB Configuration
USB Devices:
XHCI Hand-off
USB hardware delays and time-outs
USB transfer time-out
Device reset time-out
(Note)
This item is present only if you attach USB devices.
BIOS Setup
Description
Displays the USB devices connected to the system.
Enable/Disable the XHCI (USB 3.0) Hand-off support.
Options available: Enabled/Disabled. Default setting is Enabled.
Select the time-out value for USB Control/Bulk?Interrupt transfers.
Options available: 1 sec, 5 sec, 10 sec and 20sec.
Default setting is 20 sec.
Select the time-out value during a USB mass storage device reset.
Options available: 10 sec, 20 sec, 30 sec and 40sec.
Default setting is 20 sec.
- 42 -
Advertisement
Table of Contents
