Gigabyte MW22-SE0 User Manual page 19

3/4/5/6) SATA0/SATA1/SATA2/SATA3/SATA4/SATA5(SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s standard. Each
SATA connector supports a single SATA device.
SATAIII_4
SATAIII_5
SATAIII_2 SATAIII_0
SATAIII_3 SATAIII_1
7/8/9/10/11) CPU_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3/SYS_FAN4
(CPU Fan/System Fan Headers)
The motherboard has one 4-pin CPU fan header (CPU_FAN), and two 4-pin (SYS_FAN) system fan headers.
Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect
it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU
fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat
dissipation, it is recommended that a system fan be installed inside the chassis.
SYS_FAN2
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the
headers.
CPU
SYS_FAN1
CPU
CPU_FAN
SYS_FAN4
SYS_FAN3
SATAIII_2
7
7
SATAIII_3
1
SATAIII_4
7
1
SATAIII_5
7
1
Pin No. Definition
1
2
3
4
- 19 -
SATAIII_0
1 7
7
1
SATAIII_1
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
1
GND
+12V
Sense
Speed Control
Hardware Installation
1
1