Pch-Io Configuration - Gigabyte MW22-SE0 User Manual

2-3-2 PCH-IO Configuration
Parameter
PCH-IO Configuration
SATA Configuration
Description
Press [Enter] to configure advanced items.
SATA Controller
Š
– Enable/Disable SATA controller.
– Options available: Enabled/Disabled. Default setting is Enabled.
SATA Mode Selection
Š
– Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its
AHCI functionality. Then the RAID function is disabled and cannot
be access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both
its RAID and AHCI functions. You will be allowed to access the
RAID setup utility at boot time.
– Options available: AHCI/RAID. Default setting is AHCI.
SATA Port 0/1/2/3/4/5
Š
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
- 57 - BIOS Setup