Usb Connection; Installation Procedure - Canon ImageCLASS MF4270 Starter Manual

USB Connection

• Do not connect the USB cable before installing the software. If you connect the USB cable
before installing the software and the Found New Hardware Wizard screen appears, click
[Cancel].
• For Windows 2000/XP/Server 2003/Vista, logon as Administrator to install the software.
• Make sure the machine is turned on before connecting the USB cable.
• On the screen shown at each step, click on the circled button to proceed.
• The machine does not come with a USB cable.

Installation Procedure

1
2
If the MF4200 Series CD-ROM Setup
screen is not displayed, click [start] on
the Windows task bar → [My
Computer].
Windows Vista: click [start] on the
Windows task bar → [Computer].
Windows 2000: double-click [My
Computer] on the Windows desktop.
Open the CD-ROM icon, then double-
click [MInst] ([MInst.exe]).
Before Installation
3
4
If the disk space is insufficient to
install the software, an error message
is displayed. Free the disk space, and
then try again.
Software Settings with Computer
5
6
27