Install Toner Cartridge - Canon ImageCLASS MF4270 Starter Manual

Install Toner Cartridge

1
Remove the toner cartridge from the bag.
Do not open the drum protective shutter (A).
2
Gently rock the toner cartridge several times to
evenly distribute the toner inside.
3
Place the toner cartridge on a flat surface and
pull the seal completely out.
Do not pull the seal out at an angle.
–
If toner is adhered on the removed seal, be careful that
your hands or clothes do not get dirty from touching the
toner.
–
If your hands or clothes get dirty from touching the toner,
wash them immediately in cold water. Do not use hot
water. If you do, the toner may be set permanently.
4
Hold the front side of the operation panel with
your hands.
Set Up the Machine
5