Table of Contents
Advertisement
8.4.2
FXC E1 transmission unit
The FXC E1 has four pairs of 75 Ω connectors (type BT-43). Each pair forms a
transmission interface (IF). The upper connector is always the TX connector of
any given transmission interface. The lower connector is always the RX
connector of any given transmission interface (see Figure 21).
Note
The 75 Ω TX and RX connectors are connected to each other with a grounding
bridge (see Figure 21). If the grounding bridge is removed, the grounding of the
RX connector's outer conduct changes from direct grounding to capacitive
grounding.
TX line, IF1
TX line, IF2
TX line, IF3
TX line, IF4
Figure 21.
60 (72)
© Nokia Corporation
Nokia Proprietary and Confidential
All manuals and user guides at all-guides.com
Grounding bridge
RX line, IF1
RX line, IF2
RX line, IF3
RX line, IF4
Cabling of the FXC E1 transmission unit
Installation
DN991456
Issue 3 en
Advertisement
Table of Contents
