Table of Contents
Advertisement
Pre-assembling the pole brackets
1.
2.
3.
4.
1
3
Figure 9.
36 (72)
© Nokia Corporation
Nokia Proprietary and Confidential
All manuals and user guides at all-guides.com
Insert the M8 assembly bolts and washers into the bolt holes in the back
blocks. See [1] in Figure 9.
Attach the square nuts on the ends of the bolts. Screw on the nuts just
enough to secure them on the ends of the bolts. See [2] in Figure 9.
Slide one of the bolts with the square nut into the slot at the side of the front
block. See [3] in Figure 9.
Screw the bolt in further, enough to prevent the bolt and the square nut
from sliding out from the front block. See [4] in Figure 9.
2
4
Pre-assembling the pole brackets
Installation
DN991456
Issue 3 en
Advertisement
Table of Contents
