6. Take the parasol frame with cloth and go with the cord
as close as possible to the end of the parasol pole. Lower
the cord through the opening until it emerges at the
bottom. After assembly, a certified electrician to fit the
end of the cable with a suitable plug. with an appropriate
plug.
8. Install the appropriate caps on the parasol frame and
the vertical tube. Now place the cushions in the Kosmos
as in step 5 on page 5.
This strap can also be used to hold the parasol open:
a)
In
case
of
b) After not using the parasol for a long time: it is possible
that the magnetic clasp does not hold temporarily, due
to internal tension in the parasol fabric. If this is the
case, please place the strap on the magnetic ribs as
long as necessary in order to stretch the fabric again.
rain:
creates
drains.
7. Now insert the parasol through the opening in the
vertical tube until it locks in place and lock in place with
bolts M6x12.
10. Now open the parasol. Does the magnetic lock not
hold, first loosen the velcro strap and open the parasol
again. Only now you can close the velcro again. In closed
position one has to fix the leather leather strap on the
umbrella frame to be attached to the two to the two
outer ribs to prevent the parasol from the parasol from
opening.
Optional: screw the lamp into its socket.
english
9
Need help?
Do you have a question about the KOSMOS and is the answer not in the manual?
Questions and answers