Advertisement
IMPORTANT
Ÿ
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
STEP 6
Place unit at desired location.
Drill a 3/8" hole in wall in-line with
the pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 9)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Hardware List
Anchor
1 pc. (+1 extra)
Assembly Instructions 5/5
Bracket
2 pcs. (+1 extra)
Anchor in wall
3/8" wall hole
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
Tipover Restraint
1 pc. (+1 extra)
Wall Screw
Bracket
on wall
Wood Screw
Figure 9
Drill 3/8" hole in wall
Top of unit
M3.5x40
Wall Screw
1 pc. (+1 extra)
Pre-drilled hole
at top of unit
M3.5x16
Wood Screw
1 pc. (+1 extra)
Advertisement
