Selecting and Adjusting the Screen
Selecting the options
• Tile ID
• H Size
• V Size
Use this function to set the power indicator on the front side of the product to
On or Off.
If you set Off, it will go off. If you set On at any time, the power indicator will
automatically be turned on.
Use it to see the difference between XD demo on and XD Demo off.
(XD Demo function is not available in RGB PC/ HDMI/DVI PC mode.)
The image is omitted by the distance between the screens to be naturally shown.
Select the location of the Tile by setting an ID.
Adjust the horizontal size of the screen taking into account the size of the
Adjust the vertical size of the screen taking into account the size of the bezel.
Moving the screen position horizontally.
Moving the screen position vertically.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns
to Full screen.