Selecting and Adjusting the Screen
Selecting the options
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RS-232C or RGB Out
• Tile Mode
Tile mode and choose Tile alignment and set the ID of the current product to set
* Only after pressing the SET button the
adjustments made to the settings will be saved.
- Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4)
- 4 x 4 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
- Tile mode (product 1 ~ 4) : r(2) x c(2)
It is used to enlarge the screen and
also used with several products to