Changing The Adjustment Mode - Canon FS 3.6 User Manual

Changing the Adjustment Mode

The method for adjusting brightness and coloring can be set to either easy mode
or expert mode. In easy mode, you can adjust the brightness and coloring (only
brightness is changed for grayscale images and threshold values for black and
white images) by looking at and selecting samples proposed by CanoCraft FS. In
expert mode, you adjust them with various image processing functions.
Easy Mode Categories
Brightness (24-Bit Color/8-Bit Grayscale)
Color Balance (24-Bit Color/36-Bit Color)
Threshold (Black and White)
Expert Mode Categories
Histograms (24-Bit Color/36-Bit Color/8-Bit Grayscale/12-Bit Grayscale)
Brightness/Contrast (24-Bit Color/36-Bit Color/8-Bit Grayscale/12-Bit Grayscale)
Gamma Values (24-Bit Color/36-Bit Color/8-Bit Grayscale/12-Bit Grayscale)
Tone Curves (24-Bit Color/36-Bit Color/8-Bit Grayscale/12-Bit Grayscale)
Color Balance(24-Bit Color/36-Bit Color)
Threshold (Black and White)
• If you are new to color correction, please ensure that you read the
instructions in this manual thoroughly before you attempt the expert mode.
Set the adjustment mode by clicking the [Image] menu and selecting an option.
Click the [Image] menu and select either
[Easy Mode] or [Expert Mode].
Highlight the desired adjustment mode
and click it.
The current selection will
have a check mark beside it
Step 3 • Adjusting Images
54