Scan Resolution; Film Type; Exposure; Focus - Canon FS 3.6 User Manual

Scan Resolution

Select the [Scanning Resolution] option from the setup submenu.
At installation, this setting is set to [Default Resolution].

Film Type

Sets the type of film being scanned.
• Please refer to the Selecting the Film Type topic for instructions on selecting
the film type.

Exposure

Allows the manual adjustment of the exposure setting (scan speed) for film that
has been intentionally over- or underexposed or that has an extremely bright or
dark background.
• Please refer to the Adjusting the Exposure Settings topic for instructions on
adjusting the exposure setting.

Focus

Switches between the autofocus and manual
focus settings for printing. While the autofocus
setting is sufficient for standard films, warped or
distorted films or those shot slightly out of focus
may require manual adjustment.
• Please refer to the Adjusting the Focus topic for instructions on adjusting
the focus. (p. 72)
• If the image remains blurred even after adjusting the focus manually, check
the film to ascertain that it was shot in focus.
High Resolution: scans at the printer's resolution setting.
Default Resolution: scans at half the printer's resolution setting.
Low Resolution: scans at one-third of the printer's resolution setting.
(p. 29)
(p. 70)
Copying with CanoCraft FS Copy
109