Adjusting Brightness And Coloring (Easy Mode); Brightness Tab - Canon FS 3.6 User Manual

Adjusting Brightness and Coloring (Easy Mode)

In easy mode, the brightness and coloring of 24-Bit Color images can be adjusted
with the adjust dialog.
Click [Image] and select [Adjust] or
click the [Adjust] button.
• The brightness and coloring of an image may vary significantly if the display
and printer color profiles differ. To ensure conformity, test repeatedly to
ensure that the brightness and coloring settings are set to the best values
for the final output device (i.e. the printer).

Brightness Tab

Click on the samples until the adjusted image reaches the desired brightness in the
brightness tab. The brightness of the adjusted image changes each time you click a
sample. The amount by which the preview sample changes with each click is
controlled with the slider bar.
Original Image
Click on the sample closest to
the desired brightness.
Brightness Tab
Click a tab to change the image to the corre-
sponding brightness and coloring settings.
Adjusted Image
Slider Bar Controlling the Change in
Brightness
Slide it right to increase the increments.
Slide it left to decrease the increments.
Reflect Changes in Preview Image
Placing a check in this box reflects the
changes in the preview image in the
preview window in real-time.
Cancels any adjustments and closes the
adjustment dialog.
Accepts the adjustments and applies them to the preview image
in the preview window.
Step 3 • Adjusting Images
Coloring Tab
55