Specifications - Jet 414500 Operating Instructions And Parts Manual

Specifications

JET's 14-inch Vertical Band Saws are specially designed to effectively cut a variety of materials including
wood, plastic, bakelite, composites, ferrous and non-ferrous metals. Models J-8201 and J-8203 are wood and
metal cutting band saws. JET's Model J-8201VS and J-8203VS 14-inch Variable Speed Band Saws are ideally
suited for metal cutting only with an infinitely variable speed range from116 to 334 SFPM. The variable speed
drive system allows the operator to fine-tune the blade speed to the material being cut to maximize the life of
today's bi-metal blades. These versatile and dependable saws are capable of contour cutting, straight cutting
and resawing, and these band saws can cut delicate curves in thick or thin stock.
Model number ...........................................J-8201K ..................... J-8203K ................. J-8201VS ................ J-8203VS
Stock number ............................................. 414500 ....................414504C .................... 414502 .................... 414503
Capacities:
Under Guide (in.) ............................................ 6 .............................. 6 .............................. 6 ............................. 6
Under Guide with Riser Block (in.) ................. 12 ..............................12 ............................ 12 ........................... 12
Throat Capacity (in.) ................................... 13.5 ........................... 13.5 ......................... 13.5 ........................ 13.5
Blade Width Capacity (in.) ................... 1/8 to 3/4 ................... 1/8 to 3/4 ..................1/8 to 3/4 ................. 1/8 to 3/4
Motor:
Rating ................................................ 1HP 1PH ................... 1HP 3PH ..................1HP 1PH ................. 1HP 3PH
Voltage ......................................... 115/230 VAC ............. 230/460 VAC ........... 115/230 VAC ........... 230/460 VAC
Listed Full Load Amps ............................ 10/5 A .................... 3.6/1.8 A ...................... 10/5 A ................. 3.6/1.8 A
Speed .............................................. 1725 RPM ................. 1725 RPM ................ 1725 RPM ............... 1725 RPM
Cutting Speeds:
Wood (SFPM) ............................................ 3300 .......................... 3300 ........................ 2600 ........................2600
Metal (SFPM) ............................... 39,57,78,107 .............39,57,78,107, ..................... 90-340 .................... 90-340
Table:
Size (in.) ................................................ 14 x 14 ...................... 14 x 14 .....................14 x 14 .................... 14 x 14
Height from Floor (in.) ................................... 44 ..............................44 ............................ 44 ........................... 44
Tilt to Right ............................................ 45 deg. ...................... 45 deg. .................... 45 deg. .................... 45 deg.
Tilt to Left .............................................. 15 deg. ...................... 15 deg. .................... 15 deg. .................... 15 deg.
Miter Gauge Groove (WxD/in.) ............. 3/4 x 3/8 .................... 3/4 x 3/8 ................... 3/4 x 3/8 .................. 3/4 x 3/8
Miter Gauge.............................................. standard .................... standard .................. standard .................. standard
Noise emission (tested @3ft from machine):
Idle .......................................................... 70 dB ........................ 70 dB ....................... 70 dB ...................... 70 dB
With load ................................................. 75 dB ........................ 75 dB ....................... 75 dB ...................... 75 dB
Blade Dimensions (in.) ................ 3/8 x 0.025 x 93.5 ...... 3/8 x 0.025 x 93.5 ..... 3/8 x 0.025 x 93.5 .... 3/8 x 0.025 x 93.5
Floor Space Required (LxWxH/in.) ..... 26x18-1/2x67 ............. 26x18-1/2x67 ........... 26x18-1/2x67 .......... 26x18-1/2x67
Net Weight (lb)..................................................171 ............................ 155 .......................... 325 ......................... 325
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
(Prewired 115V) ...... (Prewired 230V) ....... (Prewired 115V) ...... (Prewired 230V)
142,196,278 .............. 142,196,278 ......... Variable speed ........ Variable speed
7