fantastic furniture Jervis Single Bed Manual page 7

Step 5 (a)
You will need
26 x End
Connectors (P6)
Insert the slat (P7) into the end connectors (P6).
Step 5 (b)
Lower the slat (P7) with the end connectors (P6) to the side rails (P3). Ensure the
connectors are in place over the side rail holes and apply downward pressure on
the slat (P7) with the end connectors (P6) until the end plastic cap is fully
inserted into the rail.
Repeat step 5a to 5b for the remainder of the slats.
fantasticfurniture.com.au
13 x Slats (P7)
Page 7