Avtech IC-YGN2003 User Manual page 17

Vertical / horizontal movement automatically
 Auto pan
Click on
 Preset point
You can configure up to six preset points to move the camera view to the angles you specified.
How to set a preset point
Step1: Click on
Step2: Click on
How to use a preset point
When the camera view has been moving to other area, click on
a preset point.
Digital zoom
Click on to enable the digital zoom function.
 Zoom-in
Place two fingers on the screen near each other to zoom in on the current view.
Then, tap or swipe with your finger on the screen to move to the area you want to see more clearly.
 Zoom-out
 Place two finger on the screen and spread them apart to zoom out on the current view.
LIVE VIEW
to start panning 350° only once based on the current position.
to move the camera view to the area you want.
, press and hold a numbering from 1 ~ 6 till you see the message Set Success.
and choose the numbering which has configured
11