Install ION 2000
STEP 7 |
Insert the threaded nails parally into the anchors, leaving a ny gap to hang the wall
mounng bracket.
STEP 8 |
Hang the device onto the wall, making sure to match the four (4) screw holes on the bracket
with the four (4) threaded nails on the wall.
STEP 9 |
Tighten the screws to secure the device on the wall.
STEP 10 |
Finally, verify that the device is securely mounted on the wall.
ION 2000 Hardware Reference
27
2021 Palo Alto Networks, Inc.
©