Install ION 2000....................23 Rack Mount the ION 2000.....................24 Wall Mount the ION 2000..................... 26 Set Up the ION 2000 with an Exisng Router..............28 Set Up the ION 2000 by Replacing the Router..............31 ION 2000 Hardware Reference 2021 Palo Alto Networks, Inc.
Before You Begin Read the following topics before you install or service a Palo Alto Networks next- ® generaon firewall or appliance. The following topics apply to all Palo Alto Networks firewalls and appliances except where noted. > Tamper Proof Statement >...
• The integrity of the tamper-proof tape used to seal the box or crate is not compromised. • The integrity of the warranty label on the firewall or appliance is not compromised. ION 2000 Hardware Reference 2021 Palo Alto Networks, Inc.
ION 2000 Overview Learn about Instant-On Network (ION) 2000 and plan your deployment. > ION 2000 > ION 2000 Ports > ION 2000 Front Panel with LEDs > ION 2000 Specificaons > ION Device Compliance Statement > ION 2000 Fail-to-Wire Cabling Matrix >...
ION 2000 Overview ION 2000 The Prisma SD-WAN ION 2000, designed for the enterprise branch, transforms legacy wide area networks (WANs), enabling you to combine heterogeneous underlying transports into a unified hybrid WAN. It establishes service-level agreements (SLAs) for security, path selecon, and applicaon performance.
This port is reserved for future use. Controller This port is used by ION 2000 to communicate with the Prisma SD-WAN controller. Internet/LAN/WAN Ports Ports 1 - 5 are used for internet, local area network (LAN), or private router or mul-path label switching (MPLS)
ION 2000 Overview ION 2000 Front Panel with LEDs The ION 2000 LEDs indicate the status of the disk, power, and the controller connecvity: Icons Color Displays disk status Disk acvity—Orange light (Blinking) Displays controller connecvity status • Connected—Blue light •...
ION 2000 Overview ION 2000 Specificaons Learn the ION 2000 physical specificaons before starng. ION 2000 Specificaon Descripon Controller 1 x 10/100/1000 RJ-45 WAN/LAN/Internet 5 x 10/100/1000 RJ-45 Port pair 4/5 have programmable inline fail-to-wire capability. Throughput Throughput Up to 250 Mbps Encrypted throughput is measured with 1400 byte HTTP packets with all features turned on.
ION 2000 Overview ION 2000 Fail-to-Wire Cabling Matrix The ION 2000 fail-to-wire cabling matrix is shown below: Recommended Recommended Recommended Recommended Port Type/ WAN Port LAN Port Cable Cable Sengs Speed Device Device Cable WAN Port- LAN Port- ION 2000 Connecon...
ION 2000 Overview ION 2000 Installaon Kit Components The ION 2000 installaon kit contains the following parts and tools to install the device: • 1x 36W power adapter • 1x USB-to-RJ45 cable • 1x power cord, which varies depending on the country or region The following hardware parts are oponal and must be ordered separately:...
Press the power switch 5 mes (press and hold for 1 second, then, release) to shut down the device. Reboot the ION 2000 Press the power switch 3 or 4 mes to reboot the ION 2000. ION 2000 Hardware Reference 2021 Palo Alto Networks, Inc.
Install ION 2000 Before you install the Prisma SD-WAN ION 2000 at a branch site, verify the following physical installaon requirements, the installaon kit, wall-mount, and the rack-mount components. > Rack Mount the ION 2000 > Wall Mount the ION 2000 >...
L-shaped brackets that is aached to either side of the ION 2000 with two (2) screws. Aer you aach the brackets, mount the ION 2000 on to any standard 19 inch rack using three appropriate screws. STEP 1 | Gather the L-shaped rack-mounng brackets.
Install ION 2000 Wall Mount the ION 2000 Mount the Prisma SD-WAN ION 2000 on the wall using the oponal wall mounng kit. STEP 1 | Gather the wall mounng brackets. STEP 2 | Turn the ION device upside down and locate the four (4) screw holes on each corner of the device.
Set Up the ION 2000 with an Exisng Router The analyc or control mode with an exisng router allows you to insert the ION 2000 without modifying any network sengs at the remote office. The ION 2000 ulizes an inline inseron method with fail-to-wire redundancy to accomplish this.
Page 30
It is best pracce to execute this step during low traffic me or a network maintenance window where a 1-5 second network interrupon can be tolerated. At this point, the ION 2000 displays as Connected and Online-restricted on the Prisma SD- WAN console.
Set Up the ION 2000 by Replacing the Router In control mode, you replace the exisng router with the ION 2000 as a drop-in replacement for a WAN router. This mode is most useful for saving cost at new sites that are designed without a tradional router.
Page 33
It is best pracce to execute this step during low traffic me or a network maintenance window where a 1-5 second network interrupon can be tolerated. At this point, the ION 2000 displays as Connected and Online-restricted on the Prisma SD- WAN console.