Royal Enfield Bullet 500 2017 Manual page 124

MINOR MAINTENANCE TIPS
TAIL LAMP BULB REPLACEMENT
 Remove the two nuts each
from Right & Left side of the
rear number plate holder.
 Pull out Tail Lamp assembly
along with bracket and twist
the bulb holder in
anticlockwise to remove
bulb holder assembly.
 Turn old bulb to remove and
replace with a new bulb.
 Refit the bulb holder and
turn clockwise to lock the bulb
holder.
 Refit the tail lamp with
bracket on the reverse order
of removal process.
TRAFFICATOR BULB REPLACEMENT
Remove the 2 screws & take

out trafficator glass cover.
Press bulb gently & Turn

anticlockwise to take out the
bulb.
Position the new bulb inside

the holder, ensuring that the
pins in the bulb, match with
the slots in the holder.
Press the bulb and turn

clockwise to lock the bulb in
the holder.
Refit the trafficator cover cut

slot mark facing downwards
and tighten the 2 screws.
42
Cut Mark