Royal Enfield Bullet 500 2017 Manual page 123

MINOR MAINTENANCE TIPS
Do not overfill the battery electrolyte as it will spill

out through the over flow pipe and cause
corrosion to motorcycle parts.
Clean the wire terminals free of corrosion and

keep the terminals coated with petroleum jelly.
CHANGING ELECTRICAL COMPONENTS
HEADLAMP BULB REPLACEMENT
 Loosen the rim holding screw on top
and take out the head light reflector.
 Disconnect the wiring coupler over
the bulb.
 Remove the rubber grommet from
the bulb.
 Press the clip by thumb to release the
free end from bulb holder.
 Pull out the bulb.
ASSEMBLING THE HEAD LAMP BULB
1. Refix the new halogen
bulb into reflector unit of
the headlamp.
2. Gently press the bulb
holding clip and lock the
free end in its slot.
3. Fit the rubber grommet.
4. Connect the electrical
connections carefully &
assemble the headlamp
in the reverse order of
dismantling.
C A U T I O N
Never touch the bulb with your
fingers, Finger prints will etch the
glass and decrease bulb life. Always
hold the bulb with paper or clean dry
cloth during handling.
41