Royal Enfield Bullet 500 2017 Manual page 117

MINOR MAINTENANCE TIPS
FRONT WHEEL REMOVAL
Place motorcycle on center stand, on a firm flat

surface. Place a wooden block below the front
end of the engine to support the motorcycle so
that the front wheel is off the ground.
 Disconnect speedo cable.
Loosen the pinch bolt on

the right fork guide.
 Hold front axle by spanner
and loosen axle nut then
remove nut along
washer.
 Tap and remove the front
wheel spindle from the right
side.
Tilt the motorcycle to right

side and take out the wheel
along with speedo drive and
right side spacer.
35
with