MINOR MAINTENANCE TIPS
SPARK PLUG
CLEANING AND ADJUSTING PLUG GAP
Two spark plugs are provided in your motorcycle
Remove spark plug using the plug spanner and
tommy bar.
Clean the insulator tip and electrodes of the plug
carefully.
Check and set the electrode gap between 0.70 to
0.80 mm for UR6DC & 0.80 to 0.90 mm for WQR8DC.
Gap 0.70 to 0.80 mm
Gap 0.80 to 0.90 mm
Refit the spark plug on the cylinder head.
INSPECTION OF TYRES AND WHEELS
Inspect the tyres periodically for tread wear, cracks
and cuts.
Minimum tread depth :
Front tyre : 1mm
Check and remove stone, splinters, nails or other
particles embedded in the tyre treads.
Periodically inspect wheels for spokes breakage
and wheel rim run out.
Check proper seating of the tyre beading on the
rim whenever the tyre is reassembled.
Use only recommended tyres & tubes, inflated to
correct air pressure.
Front
Solo
1.41 kg/cm
2
(20 PSI)
With Pillion
1.55 kg/cm
(22 PSI)
2
34
Rear tyre : 2 mm
Rear
2.21 kg/cm
2
(30 PSI)
2.20kg/cm
(32 PSI)
2