Page 2
Pre-Installation Safety Instructions 5. Do not install the device in outdoor areas which may be exposed to rain, cold and dust. You can do indoor installation or on the 1. Do not install the device in extremely hot temperature or under turnstile under the roof as shown in Figure b.
All rights reserved. No part of this document may be copied or reproduced in any The COSEC VEGA is available in different variants as follows: form or by any means without the prior written consent of Matrix Comsec. 1) COSEC VEGA FAX Warranty Limited Warranty.
Figure 3 Figure 4 Figure 5 MA TR IX CO MS EC USB Port MATRIX COMSEC Back Cover CPM Slot (Card Personality Module) 4. Press the free end of the module inwards with your fingertips to Cable Connectors lock it in place as shown in Figure 7.
What your package contains • Installation and servicing should be done only by a qualified technician. • • COSEC VEGA Controller Unit Power Adpater 12VDC,2A • There are no user-serviceable parts inside. • • Mounting Plate with screw Exit Switch Cable •...
Page 6
Step 2: Fix Mounting Plate with supplied screw grips & screws. Figure 11 Figure 10 Screw Screw Cables Duct box grip Hole Step 4: Align COSEC VEGA with the Mounting Plate and slide downwards. Step 3: Connect cables and lead all the cables through the rectangular hole into the electrical box recessed in the wall i.e.
Figure 12 Figure 13 Mounting Hooks Mounting Slots Mounting Hooks Mounting Slot Connecting the Cables Mounting Mounting • Make the electrical connections of Power, Exit Switch, EM Lock, Screw hole Screw Ethernet, AUX I/O Connector and External Reader as per respective wire color code mappings shown in respective connectors.
Page 8
Figure 14 Power Ethernet GND- Black UNUSED -NA COM 2-Yellow +12VDC IN- Red UNUSED -NA COM 1- Green RX+ -Dark Blue Exit Switch RX- -Light Blue TX+ -Red Exit Sw- White TX+ -Light Brown GND- Black CAUTION External Reader EM Lock +12V RDR-Red GND- Black LOCK TMPR -Light Blue...
Connecting to the COSEC Server Click Server Settings and enter the URL and Port of the • selected server with which device is to be connected as shown in Figure 17. For COSEC VYOM, you must specify Tenant ID Assigning IP Address & Other Network Settings also.
Technical Specifications Figure 16 Specifications FAXQ Sensor (STQC (Suprema Certified) SFM 5030) Credential Support Face , Face , Face , Face , Pin, Card, Pin Card, Pin RFID and Card and and Finger and Finger Finger User Capacity 50,000 EM Prox Type of Card EM Prox, HID Prox, MIFARE...
Wifi and Bluetooth Specifications Specifications FAXQ WL18MODB (Test Grade: WL Model Name 1835MODCOM8B/WL 1835MODGBMOC/WL 1831MODGBMOC) Door Lock Relay Relay SPDT, FormC, 1A@ 30 VDC Texas Instrument Brand Name Door Lock Power Internal 12VDC @0.5A WiFi and Bluetooth Module EUT Type or External EMC (Europe) Compliance...
Page 12
At the end of product life cycle; batteries, soldered boards, metal components and plastic components must be disposed through recyclers. If you are unable to dispose-off the products or unable to locate e-waste recyclers, you may return the products to Matrix Return Material Authorization (RMA) department. For more, visit :...
Page 13
MATRIX COMSEC PVT LTD Head Office 394-GIDC, Makarpura, Vadodara, Gujarat, 390010, India Ph: (+91)1800-258-7747 Email: Support@MatrixComSec.com www.matrixaccesscontrol.com...
Need help?
Do you have a question about the COSEC VEGA FAX and is the answer not in the manual?
Questions and answers