Subscribe to Our Youtube Channel
Related Manuals for Matrix COSEC EBS200
Summary of Contents for Matrix COSEC EBS200
- Page 1 How to reset the IP address of COSEC EBS200? Access Control and Time Attendance Date: June 2021 Version: V1R1 Author: Priyanka Biscuitwala...
- Page 2 In the case of forgetting the IP address of a COSEC EBS200 device,we need to change it to the default IP address to access it easily . The specific method to reset the IP address is shown below. Follow the below steps to reset the Password...
- Page 3 Step 2: Create a blank File in the Notepad. ● Open a Blank file in Notepad. ● Click on File > Save As… > File Name as reset > Save as type (.*txt) ● Click on the Save option.
- Page 4 Step 3: Insert the USB to Laptop/PC. NOTE: USB Drive should be blank or formatted.Here we have inserted USB Drive(F:) ● Copy the created text file to the USB Drive(F:)
- Page 5 Step 4: Connect USB Drive to the USB port of COSEC EBS200 board. Step 5: Reboot the Board. ● Remove the power cable from the board.It will set to the default IP.
- Page 6 ● Reconnect the power cable to the board. Wait for a few seconds. Step 6: Check the ping on Default IP. ● Open the Command Prompt > Check the ping on default IP 192.168.50.2 ● As the IP of the device has been reset we can get the Ping as shown below.
- Page 7 The contents of this message need not necessarily reflect or endorse the views of Matrix Comsec on any subject matter. Any action taken on or omitted in this message will be at the owner’s risk and the originator of this message or Matrix Comsec does not take any responsibility or liability towards the same.
Need help?
Do you have a question about the COSEC EBS200 and is the answer not in the manual?
Questions and answers